Casting mold flux

                        Introduction

                        Casting powder is the heart of continuous casting, which plays a key role in continuous casting process. Excellent mold flux performance could greatly improve surface quality of casting blank and casting speed.

                        Multiple kinds of calcium metasilicate and necessary raw materials mixed together per clients specific steel making demands to produce mold flux.

                        Sheng Iron company provide not just Mold flux for clients, also customized design based on clients actual steel making demands. Over 30 years of casting mold flux production experience committed us to provide professional technical support & solutions for all our clients in domestic and overseas.

                         

                        Five major effects of mold flux:

                         

                        (1)Good lubrication for casting billets to smoothly pulled out of the crystallizer.
                        (2) Good insulation capacity and good diffused ability
                        (3) Heat transfer control, improve the heat conduction rate and uniformity.
                        (4) Prevent molten steel from secondary oxidation
                        (5)Absorb the inclusions to improve the cleanliness of the steel

                        According to the different types of slab and carbon content etc. Mold flux series products could divided into following types:

                         

                        Slab mold flux series

                        Ultra low carbon steel mold flux series

                        Section:(100-320mm)×(800-3250mm) 
                        Casting speed:0.8-2.0m/min 
                        Applicable steel: IF steel, Oriented silicon steel, Non-oriented silicon steel ?(All specification and design can be customized, this data is for reference only)

                        Low carbon steel mold flux series

                        Section:(100-320mm)×(800-3250mm) 
                        Casting speed:0.8-2.0m/min 
                        Applicable steel: Q195,SPHC,SPHE etc.(All specification and design can be customized, this data is for reference only)

                        Medium carbon steel mold flux series

                        Section:(100-320mm)×(800-3250mm) 
                        Casting speed:0.5-1.8m/min 
                        Applicable steel:Q235,Q345,weathering steel etc(All specification and design can be customized, this data is for reference only)

                        High carbon steel mold flux series

                        Section:(100-320mm)×(800-3250mm) 
                        Casting speed:0.8-2.0m/min 
                        Applicable steel:45#,65Mn,GCr15 etc (All specification and design can be customized, this data is for reference only)

                        Thin slab low carbon mold flux series

                        Section:(50-90mm)×(850-1800mm) 
                        Casting speed: 2.8-5.5m/min 
                        Applicable steel:SPHC,SPHE etc (All specification and design can be customized, this data is for reference only)

                        Thin slab medium carbon mold flux series

                        Section:(50-90mm)×(850-1800mm) 
                        Casting speed:2.8-5.0m/min 
                        Applicable steel:Q345,Q235 etc. (All specification and design can be customized, this data is for reference only)

                        Billet mold flux series

                        Plain carbon steel mold flux series

                        Section:(120-280mm)×(120-280mm) 
                        Casting speed:1.2-3.5m/min 
                        Applicable steel:Q195-275,400E,Q335,Q215 etc ?(All specification and design can be customized this data is for reference only)

                        Medium carbon steel mold flux series

                        Section:(120-280mm)×(120-280mm) 
                        Casting speed:1.2-3.5m/min 
                        Applicable steel:20Cr, 27SiMn, 35K, 40Cr, 42CrMo, 45# etc (All specification and design can be customized, this data is for reference only)

                        High carbon steel mold flux series

                        Section:(120-280mm)×(120-280mm) 
                        Casting speed:0.8-3.0m/min 
                        Applicable steel:47A, 55#, 65Mn, 70#, 72A. 72B, 82A, 82B, GCr15 etc All specification and design can be customized, this data is for reference only)

                        Open casting billet mold flux series

                        Section:(120-240mm)×(120-240mm) 
                        Casting speed:1.5-3.5m/min 
                        Applicable steel:Open casting Q235, Q215, 400E, Q195 etc All specification and design can be customized, this data is for reference only

                        Stainless steel mold flux series

                        200 series

                        Section:(120-200mm)×(430-1200mm) 
                        Casting speed:0.8-1.5m/min 
                        Applicable steel:201,J1,J3 etc(All specification and design can be customized, this data is for reference only)

                        300 series

                        Section:(120-200mm)×(430-1200mm) 
                        Casting speed:0.8-1.5m/min 
                        Applicable steel:301,304,306L etc(All specification and design can be customized, this data is for reference only)

                         

                        Contact us

                        For product information and pricing, chat with sales agent:

                        About us
                        Company Profile
                        Company vision
                        Product & Service
                        Anhydrous Tap Hole Clay
                        Castable for Iron Trough
                        Other products
                        Other Refractories for BF
                        Refractories for Tundish
                        Refractories for steelmaking
                        QC & Technical
                        Quality Control
                        Technical Supports
                        Document Download
                        Contact us
                        Phone/Fax: 0086 379 69528485
                        Email: info@sirefractories.com
                        Address:Pengbei Industrial Zone, Yichuan County, 471311, Luoyang City,China
                        FOLLOW US
                        国产极品美女高潮无套在线观看